BladeSystem Virtual Connect
cancel
Showing results for 
Search instead for 
Did you mean: 

Virtual Connect - Not Logged in (vmare/brocade)

Seb75
Visitor

Virtual Connect - Not Logged in (vmare/brocade)

Hello,

I am new on Virtual Connect Technology and I turn around a trouble without find the solution...

I have added a new blade, BL 460c gen9 (same models we have already) with HP FlexFabric 10Gb 2-port 536FLB Adapter.
I have created a server profile on Virtual Connect but the status stay "not logged" without any uplink port.
I have downgraded the firmware & drivers of the fiber card like another Blade which is OK... but same result...

I had not make the zoning on Brocade, I did'nt see the new devices, (and yes NPIV is enabled).
On esx I see the 2 fcoe nic but without all informations :

vmhba32
Source MAC: d0:67:26:ac:d4:71
FCF MAC: 00:00:00:00:00:00
VNPort MAC: 00:00:00:00:00:00
Physical NIC: vmnic2
User Priority: 3
VLAN id: 0
VN2VN Mode Enabled: true

vmhba33
Source MAC: d0:67:26:ac:d4:79
FCF MAC: 00:00:00:00:00:00
VNPort MAC: 00:00:00:00:00:00
Physical NIC: vmnic3
User Priority: 3
VLAN id: 0
VN2VN Mode Enabled: true

 

If someone could help me ?? 

Thank in advance,

Best regards

1 REPLY
Seb75
Visitor

Re: Virtual Connect - Not Logged in (vmare/brocade)

Hello,

If any body have an idea on my trouble ?

More informations :
- NPIV is enabled on san switch (brocade), we have already blades on this ports
- esxcfg-scsidevs -a  show : 
vmhba32 bnx2fc link-up fcoe.2000d06726acd471:1000d06726acd471 (0000:06:00.2) Broadcom Corporation QLogic 57840 10 Gigabit Ethernet Adapter
vmhba33 bnx2fc link-up fcoe.2000d06726acd479:1000d06726acd479 (0000:06:00.3) Broadcom Corporation QLogic 57840 10 Gigabit Ethernet Adapter

So maybe it is more a trouble on virtual connect, my server profile ? too more server on upling ports ? there is already between 4 & 6 servers on ports

I hope some help...