BladeSystem Virtual Connect
cancel
Showing results for 
Search instead for 
Did you mean: 

Virtual Connect: Server Blade Bay NO SAN Uplink Port

Ralf Strauch
Occasional Contributor

Virtual Connect: Server Blade Bay NO SAN Uplink Port

Hello all,

 

we're using a c7000 Bladesystem & 9 x HP ProLiant BL460c G8 Server Blades.

 

One particular Server bay does NOT get an SAN UPLINK Port & HBA Port Status "Not Logged In" at the SAN Fabric section.

 

The are 2 HP VC 8Gb 24-Port FC Modules with 4 active uplink ports.

Actually 8 other server blade bays got a working uplink port & HBA Port Status "Logged In".

 

The bay which does not get an SAN/HBA uplink port shows NO errors or warnings & also "Configurd for Virtual Connect".

Ethernet connectivity is working for this bay as well.

 

So it's just a SAN/HBA issue.

 

Devices & Management:

* VersionsVirtual Connect Manager v4.30

* 2x HP VC 8Gb 24-Port FC Module (Firmware Version 1.11)

 

Many thx in advance for your help!

 

Greetings, Ralf