HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem Virtual Connect
cancel
Showing results for 
Search instead for 
Did you mean: 

Virtual connect active/active Problem in test

 
cquinones
Occasional Visitor

Virtual connect active/active Problem in test

Hello i need your help.

We have a C7000 with two Virtual Connect Module with ESX 6.0, and we configured two shared links, with four nics as multiple networks, and the configuration works fine with the VMware and shows four vmnics: vmnic0, vmnic1(vSwitch0), vmnic2, vmnic3(vSwitch1), but when we try to do the test for active/active virtual connect, only the vSwitch(vmnic0 and vmnic1)  works, the vSwitch(vmnic2, vmnic3) does not work.

So the vSwitch0 can works when the virtual connect was turn-off, but the vSwitch1 fails all the vmnics at different virtual connect.

So we need your help, why this happen?, how can we fix this issue?