BladeSystem Virtual Connect
cancel
Showing results for 
Search instead for 
Did you mean: 

What are the consequenc​es of setting NTP servers in EBIPA for Interconne​ct bays?

 
diegomartin
Occasional Visitor

What are the consequenc​es of setting NTP servers in EBIPA for Interconne​ct bays?

Hi,

I want to setup EBIPA addresses to my VirtualConnect devices in a c7000 enclosure G3.

 

I see a difference against EBIPA settings for Device Bays: In the Interconnect Bays EBIPA settings you have the option of adding NTP servers.

 

What happens if I don´t write NTP servers in there?? From where the VirtualConnect will get the date/time info?. I cannot find anything in the HP manuals.

 

What are the recommendations, to write on the EBIPA settings the same NTP servers used for the enclosure?

 

Thanks

 

interconnectNTP.PNG

2 REPLIES
Torsten.
Acclaimed Contributor

Re: What are the consequenc​es of setting NTP servers in EBIPA for Interconne​ct bays?

IIRC virtual connect get the time from OA, other interconnects may use this setting.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
diegomartin
Occasional Visitor

Re: What are the consequenc​es of setting NTP servers in EBIPA for Interconne​ct bays?

thanks Torsten.

 

You mean then that leaving in blank the 'NTP servers' field on EBIPA  Interconnect settings (but filling the rest of the fields), the VCs will get date/time from OA?

 

BR,