BladeSystem Virtual Connect
cancel
Showing results for 
Search instead for 
Did you mean: 

stacking 2 enclosures

jonb157
Occasional Contributor

stacking 2 enclosures

2 c7000 enclosures each with 2 Flex-10 modules.  To stack across enclosures I understand we use CX4 connections. Does it matter which port these use or does it have to use X1 from enc0, bay1 to enc1, bay1?

1 REPLY
chuckk281
Trusted Contributor

Re: stacking 2 enclosures

You can use any of the uplink ports as stacking links on the Virtual Connect modules. Also see the Multi-Enclosure Stacking Reference Guide. http://h20000.www2.hp.com/bc/docs/support/SupportManual/c02102153/c02102153.pdf