Simpler Navigation for Servers and Operating Systems
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
BladeSystem Virtual Connect
cancel
Showing results for 
Search instead for 
Did you mean: 

the virtual connection flex-10 interconnection configuration change

singvey
Frequent Advisor

the virtual connection flex-10 interconnection configuration change

we have two hp c7k blade systems.  when we removed the vc flex-10 interconnect modules from the c7k chassis, we forgot to mark which c7k chassis  they were removed from.  what will happen if we install the vc flex-10 interconnect modules into the wrong c7k chassis?

 

1-each chassis will maintain its original vc configuration

2- the configuration of the vc on the chassis will be swapped

3- both chassis will default to factory default settings.

4-POST will issue a warning that the wrong vc modules are inserted .

 

 

P.S. This thread has been moved from HP BladeSystem > Virtualization to HP BladeSystem Virtual Connect. - Hp Forum Moderator

2 REPLIES
Highlighted
Psychonaut
Respected Contributor

Re: the virtual connection flex-10 interconnection configuration change

Assuming that the domain is only these two VC's (and that the chassis are not stacked); #2 is what should happen.  

 

 

Server-Support
Super Advisor

Re: the virtual connection flex-10 interconnection configuration change

So how did you finally end up with the solution or the situation ?

 

please share it here :-)