BladeSystem Virtualization
Showing results for 
Search instead for 
Did you mean: 

BL460c G7 iSCSI configuration

Jannarong Poopirom
Occasional Contributor

BL460c G7 iSCSI configuration

We've got our BL460c G7 running ESXi4.1 with Lefthand P4300.

Currently we use iSCSI Software Adapter to connect to the storage and is working ok. But I just noticed

that there're 2 iSCSI adapter (Emulex OneConnect) with this blade named vmhba0 and vmhba1 both has the sam WWN.


My question is that can I use this instead of the iSCSI Software adapter ?


What is the benefit of using this ?


And how this is connected to the Lefthand P4300 ? through NIC ?



Steven Clementi
Honored Contributor

Re: BL460c G7 iSCSI configuration

A hardware adaptor offloads the iSCSI traffic from the OS to the hardware.


It is certainly acceptable to use a hardware adaptor.


It is just another network adaptor, you configure it similarly.

Steven Clementi
HP Master ASE, Storage and Clustering
MCSE (NT 4.0, W2K, W2K3)
VCP (ESX2, Vi3, vSphere4, vSphere5)
NPP3 (Nutanix Platform Professional)

Re: BL460c G7 iSCSI configuration



Yes, you can use this instead of software iSCSI and this gives an added advantage in handling the stacks better and there should be a performance improvement also, provided the network on ESXi are configured in right manner.


Check the below guides for best practices and how to setup hardware iSCSI adapters.




Was the post useful? Click on the white KUDOS! Star on the left side of this post.
For HP Guided Troubleshooting;



I work for HPE
For a quick resolution to technical issues for your HPE products is just a click away HPE Support Center Knowledge-base ""
See Self Help Post for more details ""