HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem Virtualization
cancel
Showing results for 
Search instead for 
Did you mean: 

Troubleshooting VM connection between HP Blade Servers in VMware ESXi

 
Server-Support
Super Advisor

Troubleshooting VM connection between HP Blade Servers in VMware ESXi

Hi Folks,

 

Can anyone please shed some light here on the VM communication between HP Blades within the single c7000 enclosure ?

 

Problem:

Exchange Server 2007 mailbox role - PRODMBX01-VM lose connection intermittently / randomly to the Quorum to the Exchange Server 2007 HubTransport server - PRODHT01-VM, both servers are within the same VLAN and IP address class but running on different HP Blades BL 460c G8 within the same Blade c7000 enclosure.

 

When I do Tracert between the two VMs, the result is just went straight through to the destination server (one single line reply) so no other network device in between the Tracert result.

 

Does the communication between those VM on different HP Blades goes out to the Trunk network to the core DataCenter Cisco Nexus 7000 Switch ? or just re-routed between the Virtual Connect module ?

 

is there any way to look for the connection issue ? maybe in the HP Virtual Connect log ?