BladeSystem Forums have moved here
To make BladeSystem information easier to find, we have moved the BladeSystem forums here, to Servers and Operating Systems.
Showing results for 
Search instead for 
Do you mean 

Hewlett Packard Enterprise Community

Join the conversation with experts and colleagues to get advice, discuss issues, and find solutions
Posted to:
Original author:
I read documentation and forum stuff about OA networking and VLAN’s and to be honest I’m still confused. I read don’t separate iLO’s from OA, OA from VC and so on. They must be in same VLAN. If I do I won’t be able to connect to servers kvm and VC fr...
Posted to:
Original author:
I am trying bl460c (don't know the generation) out of the rack. I have attached +12v power supply and switched 5th switch in one of the DIPs, as advised here . The main LED turned Green for some time but, after 10 seconds returned back to orange. The...
Posted to:
Original author:
Hi Guys, We have bought a c7000 with 4 460c gen6 servers, 2 x HP 1/10Gb VC-Enet Module switches, we use vmware v6 and would have a different network on the switches so we can seperate the data from vmotion, anyone any idea to config this, can i make...
NDO
Posted to:
Original author:
NDO
Hi I am trying to upgrade the firmware of the BL870c i4 , using the HP SUM update software 7.6.0 that I have downloaded into a windows server 2008. I cannot find a setup file for HP SUM update, but I did found a binary file that loads a web page, whe...
Posted to:
Original author:
Hello, In ESXi 6u2 my p400 storage controller in my SB40c Storage Blade has been deprecated. I've tried installing .vibs from previoius ESXi versions to no avail, As it's a pci type card in the blade as shown in this link http://h20564.www2.hpe.com/h...
Posted to:
Original author:
I have a c7000 with two Cisco Catalyst Blade Switch 3120G for HP in Interconnect Bays 1 and 2. Each of these switches are configured with a single default Vlan1 and all ports are members of that vlan (basically, the default initial configuration with...
Posted to:
Original author:
Firmware DVD 10.10 (4 Jun 2012) is the final version. HP Service Pack for ProLiant (SPP) has replaced it. Click here to download SPP . Regards, Vijayasarathy
Posted to:
Original author:
Hi Matt Had the same problem with Proliant BL660c gen 8, we tried almost everything we could think off, no success. Elevated the call to Level 2 engineering and they were taking very long to resolve. So we decided to apply some classical troubleshoot...
Posted to:
Original author:
It works as always, but better start at www.hpe.com now. Select the enclosure or a blade of your choice and you get http://h20564.www2.hpe.com/hpsc/swd/public/detail?sp4ts.oid=1844083&swItemId=MTX_dc5dc1fa9051424caa148ee23a&swEnvOid=54 Type:...
  • Legend
  • New MessagesNew Messages
  • No New Messages No New Messages
  • Hot TopicHot Topic
  • Replied-to Thread Replied-to Topic
  • Read Only ThreadRead-Only Topic
Events
June 6 - 8, 2017
Las Vegas, Nevada
Discover 2017 Las Vegas
Join us for HPE Discover 2017 in Las Vegas. The event will be held at the Venetian | Palazzo from June 6-8, 2017.
Read more
Each Month in 2017
Online
Software Expert Days - 2017
Join us online to talk directly with our Software experts during online Expert Days. Find information here about past, current, and upcoming Expert Da...
Read more
View all
Top Authors
Acclaimed Contributor
4305
Occasional Contributor
1
Occasional Visitor
1
View all