Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
cancel
Showing results for 
Search instead for 
Did you mean: 

Hewlett Packard Enterprise Community

Join the conversation with experts and colleagues to get advice, discuss issues, and find solutions
omz
Posted to:
Original author:
omz
Hello i have C 7000 blade with 2 flex fabric 10 GB/24 module and 8 server BL 460 gen9 my probleme is connect this with MSA2040 and SWITCH SN3000B i don't show FibreChannel module in VC Manager and when i connect SFP + to flex incompatible message or...
Posted to:
Original author:
I am new to C7000s. In 4x BL460c gen8 blades. I have installed the Infiniband FDR 2 Port 545M Adapter 702213-B21. The card does not show up in Windows. I have tried in Win12 R2 and Win16 but it shows in Device Manager as Other Device(unrecognized) I...
Posted to:
Original author:
We want to migrate a couple of enclosures from VCM to Oneview. We are running into issues that a connection can't be found. the message does not make sense because we have two VC ethenetnet modules with 6-8 connections from each server in bay 1 and 2...
Posted to:
Original author:
Hi, We have two BL680c G5 blades that have been running VMware ESXi 5.5 for the past few years. Recently, they were powered down and removed from the enclosure. When they were re-inserted into the same enclosure and powered on, they both had a red sc...
Posted to:
Original author:
Hello, I've got a blade system c7000 with inserted 2 3Gb sas module in interconnect bay 5 en 6 Connected de msa as dicribed in the 3Gb sas manual, cannot created zone group there is no save button or other button availible. Made some screen shots fro...
Posted to:
Original author:
Hi. Server ProLiant BL460c Gen8 with HP Smart Array P220i Controller with error Cache Module Status Failed. After replacing the controller, the problem is not solved. Could you please what is the problem?
Posted to:
Original author:
Hi Matt Had the same problem with Proliant BL660c gen 8, we tried almost everything we could think off, no success. Elevated the call to Level 2 engineering and they were taking very long to resolve. So we decided to apply some classical troubleshoot...
Posted to:
Original author:
Firmware DVD 10.10 (4 Jun 2012) is the final version. HP Service Pack for ProLiant (SPP) has replaced it. Click here to download SPP . Regards, Vijayasarathy
Posted to:
Original author:
It works as always, but better start at www.hpe.com now. Select the enclosure or a blade of your choice and you get http://h20564.www2.hpe.com/hpsc/swd/public/detail?sp4ts.oid=1844083&swItemId=MTX_dc5dc1fa9051424caa148ee23a&swEnvOid=54 Type:...
  • Legend
  • New MessagesNew Messages
  • No New Messages No New Messages
  • Hot TopicHot Topic
  • Replied-to Thread Replied-to Topic
  • Read Only ThreadRead-Only Topic
Events
28-30 November
Madrid, Spain
Discover 2017 Madrid
Join us for Hewlett Packard Enterprise Discover 2017 Madrid, taking place 28-30 November at the Feria de Madrid Convention Center
Read more
See posts for dates
Online
HPE Webinars - 2017
Find out about this year's live broadcasts and on-demand webinars.
Read more
View all
Top Authors
Advisor
3
Occasional Visitor
1
Acclaimed Contributor
4340
View all