cancel
Showing results for 
Search instead for 
Did you mean: 

Hewlett Packard Enterprise Community

Join the conversation with experts and colleagues to get advice, discuss issues, and find solutions
Posted to:
Original author:
I've seen some posts about virtual connect and ESXi having issues, especially if you used tunnel mode. However I have tried both tunnel and mapped mode with no luck. I have another server running ESXi 5.5 and it is working fine in the same enclosure...
Posted to:
Original author:
Hello everyone. I'm creating a new monitor at SCOM 2012R2 to receive alerts about Enclosures temperature. But I dont know the expressions to set at monitor to accomplish this goal. I need: Build first expression Second SnmpProbe Build Second Expressi...
Posted to:
Original author:
Hello guys, I'm new to HPE world and want to know what a Virtual Connect is. Is it a switch? A pass thru? Do I necessarily need Top of rack switch if I want my blade servers to communicate with the external LAN through the virtual connect. Thank you...
Posted to:
Original author:
I've noticed an issue with some of my virtual machines running on a particular host after that host was fully patched on Windows and HPE drivers/firmware from the 8.1 HPE service pack. What would happen is VM's would get stuck in a stopping state for...
Posted to:
Original author:
Hello, Is it possible to disable a entire socket in a BL460c G8/9/10 Blade? Yes or no? (I know its possible to disable cores, but an entire socket?)
Posted to:
Original author:
Hi, I have a HP c7000 blade enclosure with couple of BL460c Gen8 blades, and two HP VC Flex-10/10D interconnect modules. In the blades I have OpenStack Pike installed with latest CentOS 7 as host operating system and neutron is configured to use linu...
Posted to:
Original author:
Hi Matt Had the same problem with Proliant BL660c gen 8, we tried almost everything we could think off, no success. Elevated the call to Level 2 engineering and they were taking very long to resolve. So we decided to apply some classical troubleshoot...
Posted to:
Original author:
Firmware DVD 10.10 (4 Jun 2012) is the final version. HP Service Pack for ProLiant (SPP) has replaced it. Click here to download SPP . Regards, Vijayasarathy
Posted to:
Original author:
It works as always, but better start at www.hpe.com now. Select the enclosure or a blade of your choice and you get http://h20564.www2.hpe.com/hpsc/swd/public/detail?sp4ts.oid=1844083&swItemId=MTX_dc5dc1fa9051424caa148ee23a&swEnvOid=54 Type:...
  • Legend
  • New MessagesNew Messages
  • No New Messages No New Messages
  • Hot TopicHot Topic
  • Replied-to Thread Replied-to Topic
  • Read Only ThreadRead-Only Topic
Events
See posts for dates
See posts for locations
HPE at 2018 Technology Events
Learn about the technology events where Hewlett Packard Enterprise will have a presence in 2018.
Read more
See posts for dates
Online
HPE Webinars - 2018
Find out about this year's live broadcasts and on-demand webinars.
Read more
View all
Top Authors
HPE Pro
9
Acclaimed Contributor
4386
HPE Pro
2
View all