Simpler Navigation for Servers and Operating Systems
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
cancel
Showing results for 
Search instead for 
Did you mean: 

Hewlett Packard Enterprise Community

Join the conversation with experts and colleagues to get advice, discuss issues, and find solutions
Posted to:
Original author:
Hello Experts, While trying to take IRC of a blade the auto login is not working. I have 6 blades in the enclosure One blade works fine In this affected blade there is a exclamation mark and it shows (0.0.0.0) But ILO Network default gateway settings...
Posted to:
Original author:
I have 4 storage blades D2200sb and many Crucial MX300 SSD's , 525Gb and 1050GB as well. Storage PN: 619794-001 SSD PN: CT1050MX300SSD1 The isssue is that at every reboot the sb reports that 2-3 ssds failed, randomly , every reboot are other drives....
Posted to:
Original author:
Hello All, First (Bay 3) HP Virtual Connect 4Gb FC Module (409513-B22) lost communication with Onboard Administrator (No IP assignment) and as a result the Enclosure got degraded status. The general VC FC module status was still OK (see below) Status...
Posted to:
Original author:
On my manager I cannot edit any option as everything becomes grey if I click on them. On this exemple, I am trying to add a Network to my erver profile and it just becomes completely grey. I can still go back to the menu and start over but it always...
Posted to:
Original author:
Hi, I need to firmware upgrade a Gen8 server but the latest SPP (Version 2017.07.1) is the new "Production SPP" that only supports the Gen9 and Gen10 servers. There is mention of the "Post-Production SPP" but it does not appear on...
Posted to:
Original author:
I need to upgrade the firmware on a BL460 G7. specifically the builtin network controller because of the following: Jul 15 23:23:03 maui kernel: be2net 0000:02:00.0: FW not responding Jul 15 23:23:03 maui kernel: be2net 0000:02:00.0: eth%d: Link down...
Posted to:
Original author:
Hi Matt Had the same problem with Proliant BL660c gen 8, we tried almost everything we could think off, no success. Elevated the call to Level 2 engineering and they were taking very long to resolve. So we decided to apply some classical troubleshoot...
Posted to:
Original author:
Firmware DVD 10.10 (4 Jun 2012) is the final version. HP Service Pack for ProLiant (SPP) has replaced it. Click here to download SPP . Regards, Vijayasarathy
Posted to:
Original author:
It works as always, but better start at www.hpe.com now. Select the enclosure or a blade of your choice and you get http://h20564.www2.hpe.com/hpsc/swd/public/detail?sp4ts.oid=1844083&swItemId=MTX_dc5dc1fa9051424caa148ee23a&swEnvOid=54 Type:...
  • Legend
  • New MessagesNew Messages
  • No New Messages No New Messages
  • Hot TopicHot Topic
  • Replied-to Thread Replied-to Topic
  • Read Only ThreadRead-Only Topic
Events
28-30 November
Madrid, Spain
Discover 2017 Madrid
Join us for Hewlett Packard Enterprise Discover 2017 Madrid, taking place 28-30 November at the Feria de Madrid Convention Center
Read more
HPE at Worldwide IT Conferences and Events -  2017
Learn about IT conferences and events  where Hewlett Packard Enterprise has a presence
Read more
View all
Top Authors
Valued Contributor
1
Trusted Contributor
13
Trusted Contributor
16
View all