Client Automation Standard Practitioners Forum
Showing results for 
Search instead for 
Do you mean 

failed to notify remote device-Reason one or more commands ended in error

Regular Advisor

failed to notify remote device-Reason one or more commands ended in error

Hi ,

I am using CAS 7.9.

I am getting the following error while deploying the patches to any device

"failed to notify remote device-Reason one or more commands ended in error"


If i deploy software to same device it is getting deployed .

 

Please help me to get it reslove this issue .

 

Regards,

Rohit Sinha

5 REPLIES
Trusted Contributor

Re: failed to notify remote device-Reason one or more commands ended in error

Hi,

 

Can you check the radexecd.log from the target device to see if the notify was received properly Or the command had some issue?

 

-Praveen

Regular Advisor

Re: failed to notify remote device-Reason one or more commands ended in error

Hi Praveen,

 

Thanks for your reply ..

 

Please find below Radexecd.log ..  Cas Server IP is 172.16.100.27

 

 

NVD000001V [RADEXECD ] 21:38:09 [RADEXECD / 000007f0] SYSTEM --- Connection accepted from [172.16.100.27] at [Mon May 27 21:38:09 2013]
NVD000001V [RADEXECD ] 21:38:09 [RADEXECD / 000007f0] SYSTEM --- No return socket received.
NVD000001V [RADEXECD ] 21:38:09 [RADEXECD / 000007f0] SYSTEM --- Internal Token validation will be performed
NVD000001V [RADEXECD ] 21:38:09 [RADEXECD / 000007f0] SYSTEM --- Local notify Password verification disabled.
NVD000001V [RADEXECD ] 21:38:09 [RADEXECD / 000007f0] SYSTEM --- Path restricted to IDMSYS subdirectory
NVD000001V [RADEXECD ] 21:38:10 [RADEXECD / 000007f0] SYSTEM --- Internal token validation will be used for USER ID.
NVD000001V [RADEXECD ] 21:38:10 [RADEXECD / 000007f0] SYSTEM --- UID: EB32D198
NVD000001V [RADEXECD ] 21:38:10 [RADEXECD / 000007f0] SYSTEM --- CMD: radskman sname=FINALIZE_PATCH,dname=PATCH,rtimeout=7200,startdir=SYSTEM,port=3464,ip=HPCCM.SIDBIFARM.COM,cop=y,JOBID=N:137824:137826
NVD000001V [err_cleanup ] 21:38:10 [RADEXECD / 000007f0] SYSTEM --- Closing socket [328]

 

Regards,

Rohit

Trusted Contributor

Re: failed to notify remote device-Reason one or more commands ended in error

Hi Rohit,

 

THis log looks fine. The patch connect log ( connect.log since no separate log name is in the command line) can tell what went wrong in the patch connect.

 

Is this happening only on a particular machine or in general ? Again , is this specific to a certain bulletin , OS , etc?

 

Thanks,

Praveen

Regular Advisor

Re: failed to notify remote device-Reason one or more commands ended in error

Hi Praveen,

 

It is happening for all the patches .. I am not able to deploy any patches to any system ..

 

On every system i am getting same error .. "failed to notify remote device-Reason one or more commands ended in error"

 

Where as i am able to deploy software on all the machines ..

 

Kindly suggest what should i check further .

Trusted Contributor

Re: failed to notify remote device-Reason one or more commands ended in error

Hi,

 

To start with please check the connect.log for this patch connect. The end code will give us more details on whether the connect ended properly or not. Moreover it will also confirm if the notify process launched the patch connect or not?

 

Can you try a local notify on one of those machines to see if there is an issue in remote notify.

 

-Praveen

//Add this to "OnDomLoad" event