Showing results for 
Search instead for 
Do you mean 

Daylight savings

SOLVED
Go to Solution
Valued Contributor

Daylight savings

Hi,

 

Daylight savings starts this weekend in NSW.

 

Is there a way to stop TRIM 6.2.1 from changing users settings?

 

Cheers

 

Jack

4 REPLIES
Respected Contributor

Re: Daylight savings

Im guessing saying upgrades not going to help. :P

 

Maybe turn on lock down mode till after daylight saving pass then turning it off ? ..

Valued Contributor

Re: Daylight savings

Upgrade to Objective? :-P (just kidding).

 

I'll try lock down mode.

 

Thanks

 

Jack

HPE Expert

Re: Daylight savings

Here's another thread about about the issue:

 

http://h30499.www3.hp.com/t5/TRIM-Discussion-Information-News/How-to-avoid-a-User-Interface-reset-when-Daylight-Savings-Time/m-p/2400317#M700


Neil

Note: Any posts I make on this forum are my own personal opinion and (unless explicitly stated) do not constitute a formal commitment on behalf of HPE.

(Please state the version of TRIM/RM/CM you're using in all posts. At any given time, HPE are supporting approx. 30+ released versions)

HPE Software Support Online (SSO): https://softwaresupport.hpe.com/
Valued Contributor

Re: Daylight savings

Thanks Neil :-)