HPE Community
Communications and Wireless
1752800 Members
5315 Online
108789 Solutions
New Discussion

Re: Procurve Wireless Radio Ports and Multiple Switches

 
anthonymel_1
Advisor

‎01-09-2011 02:24 PM

‎01-09-2011 02:24 PM

Procurve Wireless Radio Ports and Multiple Switches

Planning on setting up a wireless network here with our 5412zl's. With the wireless edge service module installed in one switch (MDF) what would need to be done on the other IDF switches for the radios to work. I know that on the MDF if you connect a radio it is assigned VLAN 2100, but does this happen on the other switches on my network? Or is this something that I would need to do myself? Also, would I have to tag my uplink port on my IDF switches to VLAN 2100 so it can connect to the wireless edge service module in the MDF?

Oh by the way my other switches are all 5412zl's

Thanks!
0 Kudos
1 REPLY 1
Kyle Massey
Advisor

‎02-11-2011 03:33 PM

‎02-11-2011 03:33 PM

Re: Procurve Wireless Radio Ports and Multiple Switches

You need to turn on LLDP auto-provisioning to automatically set vlan 2100 for radio-ports. THey will also layer 3 adopt via a DNS A record of PROCURVE-WESM.

Kyle
www.traversasolutions.com;http://www.linkedin.com/pub/kyle-massey/22/23/126
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.