420 VLAN ID problem

[DmitriyKor]

Hello
I have 420 + proCurve 2650 + Windows IAS
I want to use 802.1x but i have some problem on my 420 = (Radius Server returned invalid VLAN id)

I use Tunnel-Pvt-Group-ID 507 on IAS

switch config
vlan 507
name "temir_IT"
untagged 1-5,7-25,27-35,37-48
no ip address
tagged 36,49-50
exit



Jan 01 04:35:21 Notice: 802.11g:Station Forwarding: 00-18-de-c2-0b-8d Encryption key type=WPA-AES
2 Jan 01 04:35:21 Notice: Updating session key for WPA station 00-18-de-c2-0b-8d
3 Jan 01 04:35:21 Information: WPA group key update successes at 00-18-de-c2-0b-8d
4 Jan 01 04:35:20 Information: WPA 4-way handshaking successes at 00-18-de-c2-0b-8d
5 Jan 01 04:35:20 Notice: Successful 802.1x Authentication for station 00:18:DE:C2:0B:8D on Radio g VAP 0
6 Jan 01 04:35:20 Warning: Radius Server returned invalid VLAN id 12343 for STA XX:XX:XX:XX:0B:8D
7 Jan 01 04:34:59 Information: Get time from SNTP Server Fail
8 Jan 01 04:34:59 Notice: 802.11g:SSID 1 ::Station Associated: 00-18-de-c2-0b-8d
9 Jan 01 04:34:59 Notice: 802.11g:SSID 1 ::Station Authenticated: 00-18-de-c2-0b-8d

Help me please to understand the problem

Sorry for my english

[Dmitry G. Spitsyn]

Hi Dmitry !

Check the type of data in the field: Tunnel-Pvt-Group-ID.

Good luck,
Dmitry

[DmitriyKor]

I use this data on IAS
Attribute name: Tunnel-Pvt-Group-ID
Attribute number: 81
Attribute values:
vendor: radius standart
Value : 507

What's wrong here?

[Dmitry G. Spitsyn]

Hi !

The value may be a string or hex.
Try to change a type.

Good luck,
Dmitry

[DmitriyKor]

I have solved the problem
I use hex

[Dmitry G. Spitsyn]

Hi !

Please share your solution with us !
What was wrong ?

Good luck,
Dmitry

[DmitriyKor]

I have use hex in attribute value
And earlier I used string value

[DmitriyKor]

I have use hex in attribute value
And earlier I used string value