HP JetDirect w/ Cisco Aironet 350 AP w/HP Print Server wp110

[Dee_3]

I have loaded HP JetDirect on an rp2430 and want to use a Cisco Aironet 350 Access Point and an HP Print Server wp110, but our stopping point is that we cannot get the wp110 to talk to the Cisco Aironet 350 Wireless Access Point. We have tried different settings on the Cisco to match those on the wp110 but with no luck. Can anyone help with this? Thanks, Terri Christensen.

[Ron Kinner]

We would need to know a few more details about your network setup to offer any real help. Are you using TCP/IP or Appletalk? If tcp/ip are you using DHCP? Is there more than one wp110? Are you using encryption? etc. Where does it hang?

Have you tried the troubleshooting WP110 instructions at:

http://www.hp.com/cposupport/networking/support_doc/bpj07003.html

in conjunction with the cisco instructions at:

http://www.cisco.com/en/US/products/hw/wireless/ps458/products_configuration_guide_chapter09186a008007f77f.html#xtocid11

Also the cisco troubleshooting?

http://www.cisco.com/en/US/products/hw/wireless/ps458/products_configuration_guide_chapter09186a008007f773.html

Ron

[Jose Diaz_3]

Hello Terri, i have encountered the same problem that you are having. I haven't seen you post back a reply and was wondering if you were able to come up with a solution for this. I have tried calling several tech support companies and they can't pinpoint what the problem could be. Please, if theres any information that you might have please reply.
Jose