XP drivers for WL200/300?

[Ayman Altounji]

When are they coming?

Does anybody from Compaq ever post a reply in these groups?

Thanks
Thor Egil LEirtro

[Sean C. Caranna]

WL200 Work Around

IF YOU DO NOT FOLLOW THE FOLLOWING STEPS EXACTLY WINDOWS XP CAN CRASH AND CAUSE YOU TO RELOAD WINDOWS XP. BACKUP ALL DATA BEFORE PERFORMING THIS OR ANY OTHER INSTALL. THIS IS A WORK AROUND FOR THE WL200 TO WORK IN XP. DO NOT RUN THE SETUP FOR THIS SOFTPAQ ONLY LOAD THE DRIVER FROM THE SETUP DIRECTORY After inserting card when XP boots and detects new hardware do NOT let XP install software automatically. select don't search I will choose the driver to install. select you want to install a network card select have disk (point to the setup folder where you put wl200 and netcw2k.inf file) install driver disregarding all the XP complaints about the driver. latest wl200 driver link below
<>
After driver is installed download SP19982 for a version of the Intel management software for laptops which will run in XP on the desktops. Run setup from this softpaq to install management software that will work with wl200 card in XP. Note see attachment for instructions to move downloaded file from download computer to diskettes to new computer with wl200 and XP on. This file is 3.2mb when downloaded <>
Run setup once software is on XP unit with wl200 card installed. It will say no network wireless card detcted that is fine just continue setup. After complete and after restart utility will be on start bar. After it does a scan for access points it will work.

[Sean C. Caranna]

WL300 Work Around

After inserting wl200 card, when XP boots and detects new hardware do NOT let XP install software automatically. select don't search I will choose the driver to install. select you want to install a network card select have disk (point to the setup folder where you put wl300 and NETNDC2K.INF file) install driver disregarding all the XP complaints about the driver.

SoftPaq SP15583.exe is at http://www.compaq.com/support/files/networking/wlan/WL200.html

Next install wl300 software from the setup directory as usual but DO NOT reboot the system. When prompted, select restart manually later. click "start", click "run", type "msconfig" and click "OK". go to the "Startup" tab an un-check "Configuration Utility" C:\Compaq\11MBPS~2\config.exe" click "ok" Restart the system when prompted.