Comware Based
cancel
Showing results for 
Search instead for 
Did you mean: 

2 SSIDs with different subnet on MSR954

Artur_M
Occasional Contributor

2 SSIDs with different subnet on MSR954

Hello.

I've spent a couple of hours (with no succes) to customize MSR954 router.

My goal is to make 2 Wlans: 1. "corp"; 2 "guest" so their clients get different addresses from different DHCP-pool.s

I'd like clients connected to "corp" SSID get IP addresses from ip-pool "1" and clients connected do "guest" SSID from ip-pool "2". Now, I can not find a command to bind dhcp-pool do SSID. I will be grateful to you for any suggestions.

A.