HPE Community
Comware Based
1751946 Members
4786 Online
108783 Solutions
New Discussion

2924 2948 VLAN snmpwalk

 
derdast
Occasional Contributor

‎07-22-2010 11:06 AM

‎07-22-2010 11:06 AM

2924 2948 VLAN snmpwalk

I have separated my 29xx switches into several VLAN, still I am interested to know which MAC address is connected to which port.



Using snmpwalk I am not able to specify which VLAN I am querying, it only queries the first VLAN, so I am seeing the MAC addresses of the other VLAN through the Uplink of the first VLAN.



For Cisco Catalyst - there exists the trick to add the VLAN id to the community string, e.g. public@(id)



What do I have to do to have a similar result with a 3com switch?



Thanks for your help



 



 

0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.