HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Comware Based
Showing results for 
Search instead for 
Did you mean: 

2924 2948 VLAN snmpwalk

Occasional Contributor

2924 2948 VLAN snmpwalk

I have separated my 29xx switches into several VLAN, still I am interested to know which MAC address is connected to which port.

Using snmpwalk I am not easily able to specify which VLAN I am querying, it only queries the first VLAN, so I am seeing the MAC addresses of the other VLAN available through the Uplink of the first VLAN.

For Cisco Catalyst - there exists the trick to add the VLAN id to the community string, e.g. public@<id>

What do I have to do to have a similar result with a 3com switch?

Thanks for your help