Comware Based
cancel
Showing results for 
Search instead for 
Did you mean: 

2924 2948 VLAN snmpwalk

 
derdast
Occasional Contributor

2924 2948 VLAN snmpwalk

I have separated my 29xx switches into several VLAN, still I am interested to know which MAC address is connected to which port.



Using snmpwalk I am not able to specify which VLAN I am querying, it only queries the first VLAN, so I am seeing the MAC addresses of the other VLAN through the Uplink of the first VLAN.



For Cisco Catalyst - there exists the trick to add the VLAN id to the community string, e.g. public@(id)



What do I have to do to have a similar result with a 3com switch?



Thanks for your help