HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Comware Based
cancel
Showing results for 
Search instead for 
Did you mean: 

2928PWR Can't Ping Domain Controller

 
mjwlaz
Contributor

2928PWR Can't Ping Domain Controller

I'm having a terrible time bringing my 2928PWR online.  At this point the only thing I am interested in is simply adding the 2928 to my existing network in an attached building.  It is connected by fiber cable to a Baseline Plus 2848SFP.  Both switches show that they are linked so I believe the cable is OK.



I used the configuration wizard on the 2928 to give the switch an IP address on our existing subnet, changed the port type from Access to Trunk and disabled/enabled the port and still I can't ping the domain controller.



What else am I missing?



 



Thanks,



MJ