Comware Based
cancel
Showing results for 
Search instead for 
Did you mean: 

3C16071B SuperStack 3

 
johnnymill
Occasional Visitor

3C16071B SuperStack 3

We received, as a warranty repair, a 3C16071B APRS and two 60W power modules (3C16072). The APRS is powering a 3C16593A hub, also a warranty repair.



The APRS is powered with 2 AC mains power cords into Primary A and Backup B. The 3C16071B APRS is using a 'Y' cable to connect the two power modules to the hub. The manual states "This prevents the reset that occurs in the managed redundancy mode."



Yet, if I remove primary power (A) the hub will reset and later power back up. If I remove backup power (B) the hub will not reset.



Why is the hub resetting even though I am using the "Full Redundancy" Y cable?