HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Comware Based
cancel
Showing results for 
Search instead for 
Did you mean: 

3COM inter-VLAN routing between VLANs and unmanaged network

 
externl
Occasional Visitor

3COM inter-VLAN routing between VLANs and unmanaged network

Hi,

I have a 3COM 2948-SPF switch configured as follows:

[router] <- trunk -> [3COM switch with unmanaged, VLAN5, VLAN10]

VLAN5 and VLAN10 are tagged on the trunk port, 1, and untaged on ports 2-24 and 26-48 respectually.

Traffic between either of the VLANs to any of the unmanged VLAN ports is always going through the router, is there a way to make this traffic go though only the switch?

 

1 REPLY
16again
Respected Contributor

Re: 3COM inter-VLAN routing between VLANs and unmanaged network

afaik, that switch has no layer3 routing capabilities.  If you need routing between VLANs, and extra device is required. (other switch with L3 functionality, or your firewall)