3com 5500si 52 port

[RLPTech]

How do I setup routing on 5500 switch.

my carrier link is assigned to vlan13 and i can see and ping the ip address assigned to vlan13 from the outside world.

I have a /25 that i need to subnet and assign those ip's to vlans 2-12.

a subnet for vlan2 would be the following  32.72.70.120     usable are 32.72.70.121-126         32.72.70.127

 using subnet mask of  255.255.255.248

my connection to the outside world is on vlan13  33.213.70.226    the other end is 33.213.70.225  using subnet mask of 225.255.255..252

i currently have a static route applied on vlan13 of        0.0.0.0.0    0.0.0.0   33.213.70.225

Leland

P.S. This thread has been moved from Switches, Hubs, Modems (Legacy ITRC forum) to Comware-Based. -HP Forum Moderator