Comware Based
cancel
Showing results for 
Search instead for 
Did you mean: 

4200G 12 port - web interface

sdimare86
Occasional Visitor

4200G 12 port - web interface

I can not for the life of me get the web interface to work with my 4200G 12 port switch.



When logged in through the console port I get an error message saying that the username/password invalid. I have tried all of the default passwords but none work.



Where are the users and how do I manage them or change their password.



I have updated the switch to the latest boot rom and still no luck. Any assistance is greatly appreciated.



Thanks,



Steve D.
3 REPLIES
manuel.bitzi
Trusted Contributor

Re: 4200G 12 port - web interface

Hi Steve



The passwords are saved in the config file.



You habe to enter the Boot-Setup (Press Ctrl-B while displaying the startup screen) and access the menu to manage the files on the flash. There you can delete your Config-File (usually 3comoscfg.cfg) => den reboot the System.



Unfortunatelly the hole config was deleted. But theres no other way to reset the user-passwords.



regards Manuel

H3CSE, MASE Network Infrastructure [2011], Switzerland
sdimare86
Occasional Visitor

Re: 4200G 12 port - web interface

Sorry if this is a stupid question but...



to get to the config screen, I need to reboot the switch and watch the startup through the console port and then use CTRL+B or is there another way to view the flash?



Steve D.

sdimare86
Occasional Visitor

Re: 4200G 12 port - web interface

OK.



I have a custom config file that I was able to edit and get working.



I looked at the original config file and was able to make all of my necessary changes. Everything is working now.



Thanks for the point in the right direction.



Steve D.