Comware Based
cancel
Showing results for 
Search instead for 
Did you mean: 

4400 vlan problem

greg24
Regular Advisor

4400 vlan problem

Hi,



I have a 4400 switch runnning 6.13s that I am trying to serperate into 2 networks.  Each of the two networks will have an uplink to a different network.  When I create the second vlan and populate it with ports, then vlan 1 can't access the network at large.  vlan 2 works fine however it is only layer 2 traffic.



A network diagram of what I am trying to do is:



------------



4400



------------



  |        |



up1    up2



  |        |



net1   net2



 



up1 and up2 are the uplinks



vlan 1 should goto net1 and vlan 2 should goto net2



The switch has the ip of 10.10.10.251 which is on the net1 network. 



vlan 1 should be ports 1-6 an 13-18



vlan 2 should be ports 7-12 an 19-24



uplink 1 is in port 15



uplink 2 is in port 21



vlan2 was created with all the ports being untagged.



What am I doing wrong?



2 REPLIES
nyccgaz
Occasional Contributor

Re: 4400 vlan problem

Have you checked your vlan setup?



 



Ports 1-6, 13 - 18 should be vlan 1 untagged



Ports 7 - 12, 19 - 24 Should be vlan 2 untagged



greg24
Regular Advisor

Re: 4400 vlan problem

All ports in both VLANs are untagged.  This is really frustating as it should be working. 



Thanks,