Comware Based
cancel
Showing results for 
Search instead for 
Did you mean: 

4510G DHCP Helper/Relay

Nick1504
Occasional Visitor

4510G DHCP Helper/Relay

Hi Guys, I am having a problem setting up 2 additional dhcp relays.

 

Current setup: Existing VLAN 100 working DHCP, require VLAN 2 and VLAN 200 also on DHCP.

All will be using the same server.

1 REPLY
Fred_Mancen_1
Super Advisor

Re: 4510G DHCP Helper/Relay

Hi Nick.

Since you already use the DHCP server in the VLAN 100 and will use it for the other two new VLANs, I assume that it uses a single IP address.

Once the server are located in a different VLAN than the new ones, you have to use DHCP Relay.

You just need to create a DHCP Server group (maybe you already have this group created):

dhcp relay server-group <group-id> ip <server_ip-address>
interface vlan <vlan_id>
dhcp relay server-select <group-id>

 

You can use up to eight IP addresses at the group.

 

Regards.