4800G IRF Configuration Guide

[robertparten]

I am aware of going into system-view

Version 5.20 Release 2202P11

when in sys you can do:

irf?

and there is no recommendation for irf-port even when doing:

irf ?

There is no irf-port recommendation

[JoLa_3]

the syntax is, for example
irf member 1 irf-port 1 port 1
You need to select the member before you can change/select the irf-port.
irf member 1 ?
should give you the right recommendations.

[robertparten]

Thanks for the tips! I got the overall concept of IRF as it is really simple; however, I was just concerned because there was conflicting documentation online and I need for this to work the first time as this information is going into a manual for someone to follow.

[manuel.bitzi]

Ciao Robert

the manual you found is for 2206 and newer. :-)

I suggest you tu upgrade to 2208p01. It includes many features you will like.

br

Manuel

[robertparten]

Gotcha, I was able to find a manual for Release 2202 - I would love to upgrade but that is at the discretion of another person and we're trying to everything bit-by-bit so in case something fails we know what changed and can begin there.

I would hate to do many things at once and then many things break at once :(

[JoLa_3]

---

@manuel.bitzi wrote:

I suggest you tu upgrade to 2208p01. It includes many features you will like.

As I wrote some posts earlier, is it possible to use the firmware for the 5500 EI( https://h10145.www1.hp.com/downloads/SoftwareReleases.aspx?ProductNumber=JD375A )?
Because on the page for the 4800-24G-SFP there is still the 2202P15:

https://h10145.www1.hp.com/downloads/SoftwareReleases.aspx?ProductNumber=JD009A

Best regards,

JoLa

[robertparten]

One last question, only because I don't have a 4800G to test this on:

irf member 1 renumber 2

THe next command to follow shoud be?:

irf member 1 irf-port 2 port Ten-GigabitEthernet1/1/2

OR

irf member 1 irf-port 2 port Ten-GIgabitEthernet2/1/2

OR

irf member 2 irf-port 2 port TenGigabitEthernet2/1/2

ANy help is appreciated