5500GEI Xrn to S7906E redundant core

[mohd_suhaimie]

Intermitten was happen when i deploy XRN stacking at 5500GEI to 2 unit of S7906E



Scenario - 5500Gei unit 1 connect to core switch S7906E unit 1 and 5500GEi unit 2 connect to Switch S7906E unit 2.

This message was edited by mohd_suhaimie on 9-17-09 @ 8:56 PM

[mohd_suhaimie]

Intermitten was happen when i deploy XRN stacking at 5500GEI to 2 unit of S7906E



Scenario - 5500Gei unit 1 connect to core switch S7906E unit 1 and 5500GEi unit 2 connect to Switch S7906E unit 2.

This message was edited by mohd_suhaimie on 9-17-09 @ 8:56 PM

[Fred_Mancen_1]

Are you trying to connect both stacks using two links distributed in the unit stacks? If so, you need to setup a link-aggregation feature:



link-aggregation group mode static



int g1/0/N

port link-aggregation group

int g2/0/N

port link-aggregation group



You could check the status using the command:



display link-aggregation verbose



Hope this helps.

[mohd_suhaimie]

Both 5500GEi is stack by XRN cable/resilent. Core switch 1 and 2 running redundancy. 5500GEi unit is server farm site.