Comware Based
cancel
Showing results for 
Search instead for 
Did you mean: 

5900 irf on Qsfp ports on single mode fiber

gopfx
Occasional Visitor

5900 irf on Qsfp ports on single mode fiber

 

Can we use an QSFP+ to SFP+ adapter kit 665874-B21 + JD094B (X130 10G SFP+ LR) (on 40Gb  splitted port ) to establish an irf link over 300 meters to another member with the same configuration.

 

5900AF-48XGT-4QSFP+ Switch with 2 Processors
BOARD TYPE: 5900AF-48XGT-4QSFP+ Switch
DRAM: 2048M bytes
FLASH: 512M bytes
PCB 1 Version: VER.B
Bootrom Version: 147
CPLD 1 Version: 004
CPLD 2 Version: 004
Release Version: HPE 5900AF-48XGT-4QSFP+ Switch-2422P01
Patch Version : None
[SubSlot 0] 48XGT+4QSFP Plus

thks 

2 REPLIES
johnk3r
Respected Contributor

Re: 5900 irf on Qsfp ports on single mode fiber

Yes.

**************************************
ATP FLEXNETWORK V3 | ACSA
VoIP-Buddy
Trusted Contributor

Re: 5900 irf on Qsfp ports on single mode fiber

I'd be concerned about the LR SFP+... it might overdrive the optics on the QSFP+ transceiver.  I'd advise caution.  LR's should be used at both ends.

 

David