Comware Based

Re: 5920af add IRF member

 
SOLVED
Go to solution
phil211
New Member

5920af add IRF member

Hello,

we already use a single 5920af in one of our racks and want to add a second as IRF member to get a little bit of redundancy.

I would like to use the interfaces 1/0/6 and 1/0/18 as irf ports, but when i want to configure them, i get the error that i should shutdown several other ports. But these ports are used and i can't shutdown.

[HP-5920af-01]irf-port 1/1

[HP-5920af-01-irf-port1/1]port group interface Ten-GigabitEthernet 1/0/6
Check failed for reason:
Shut down the four interfaces Ten-GigabitEthernet1/0/5 to Ten-GigabitEthernet1/0/8.

Can anybody help me?

Best regards

 

 

1 REPLY 1
phil211
New Member
Solution

Re: 5920af add IRF member

Ok i found the problem.

On the 5920 there are four physical Interfaces connected to one ASIC, all four ports in one group have to be either IRF ports or all normal ethernet ports.