5940 VRRP Limits

[marosk]

We are configuring VRRP groups on HPE FlexFabric 5940 2-slot JH397A with Comware version 7.1.070, Release 2510P02. After trying to configure 257th instance we receive the foolowing error message.

Number of virtual routers on the device has reached the upper limit.

Is there way to configure more instances in this firmware release, or perhaps newer release?

Thanks.

[gc_09]

Hi There,

VRRP group ID ranges from 1-255, this is the limit.

[XMK]

Thanks for reply, would is it possible to extend number of interface where VRRP can operate using master and subordinate groups? For example I am trying this configuration:

GW1

vrrp send-gratuitous-arp
#
interface Vlan-interface300
 description GROUP1 Transit
 ip binding vpn-instance G1
 ip address 192.168.0.2 255.255.255.0
 vrrp vrid 3 virtual-ip 192.168.0.2
 vrrp vrid 3 preempt-mode delay 5
 vrrp vrid 3 name GROUP1
#
interface Vlan-interface301
 description GROUP1 Endpoints
 ip binding vpn-instance G1
 ip address 192.168.1.2 255.255.255.0
 vrrp vrid 3 virtual-ip 192.168.1.1
 vrrp vrid 3 preempt-mode delay 5
 vrrp vrid 3 follow GROUP1

The GW2 is configured similarly, except real IP is .3 and priority is 90. The state from Master point of view looks healthy.

IPv4 Virtual Router Information:  
 Running mode : Standard
 Gratuitous ARP sending interval : 120 sec
 Total number of virtual routers : 2
   Interface Vlan-interface300
     VRID             : 3                   Adver Timer  : 100       
     Admin Status     : Up                  State        : Master    
     Config Pri       : 100                 Running Pri  : 100       
     Preempt Mode     : Yes                 Delay Time   : 5         
     Auth Type        : MD5                 Key          : ******    
     Virtual IP       : 192.168.0.1                                  
     Virtual MAC      : 0000-5e00-0103
     Master IP        : 192.168.0.2                                 
     Config Role      : Master
     Name             : GROUP1

   Interface Vlan-interface301
     VRID             : 3                   Adver Timer  : 100       
     Admin Status     : Up                  State        : Master    
     Config Pri       : 100                 Running Pri  : 100       
     Preempt Mode     : Yes                 Delay Time   : 5         
     Auth Type        : None               
     Virtual IP       : 192.168.1.1                                    
     Virtual MAC      : 0000-5e00-0103
     Master IP        : 192.168.1.2                                    
     Config Role      : Subordinate
     Follow Name      : GROUP1

But only Master GW can reach VIP for Subordinate group, downstream switch or Backup GW cannot reach it via ICMP, even they have resolved it on Layer 2.

<Access>disp arp
  Type: S-Static   D-Dynamic   O-Openflow   R-Rule   M-Multiport  I-Invalid
IP address      MAC address    VLAN     Interface                Aging Type 
192.168.1.1      0000-5e00-0103 301      XGE1/0/51                19    D    
192.168.1.2      ec9b-8b62-45ba 301      XGE1/0/51                19    D    
192.168.1.3      ec9b-8b62-411b 301      XGE1/0/51                19    D 
<Access>ping 192.168.1.1
Ping 192.168.1.1 (192.168.1.1): 56 data bytes, press CTRL_C to break
Request time out
Request time out
Request time out
Request time out

GW1 and GW1 real address are rechable from this access switch. 

Firmware is 7.10_R2612P02. 

Edit: I have re-tested this feature again using 7.10_R2612P01 and it resovled the issues with reachabilitu, looks like code issue in latest GA release.