802.1X configuration for wired authentication

[Samir_FMC]

Hi all,

i have NPS server 10.211.0.53

HP A5500 switch with IP 10.211.10.18

i want to configure 802.1x to authentication computers that are joined to the domain to connect to network, and computers not connected to domain to be requested for username and password to be able to connect

how to configure this??

thanks

[faisalraza]

Hi, its quite simple. I also hit my head on this issue by ready many documents and blogs. Finally I've done it successfully. 

Would you please share your scenario and the infrastructure with the configuration. I will send you the configuration file with modification. 

Regards

Faisal

Personal Info Removed

[Samir_FMC]

Hi

i have the following

pc ====access switch ==== core-switch ==== NPS server

i have rolledback all prevoius configuration 

i used configuration was on the configuration guides.

please let me know if you have solution for this

thanks

[Linkk]

I suppose you have a Windows NPS.
You have to add the RADIUS server to the access switches and configure each port to use EAP RADIUS. The other configuration is on the NPS, you need to add each access switch as a RADIUS client and configure your different policies. 

Do you have procurve or comware access switches?

Edit:

Don't forget to activate the "automatic configuration (cabled)" service on your Windows hosts. This service activates 802.1X authentication for Windows and is disabled by default.

[hpwizard]

I also had this issue. Very useful information, Linkk.