Comware Based
cancel
Showing results for 
Search instead for 
Did you mean: 

802.1X configuration for wired authentication

Samir_FMC
Occasional Advisor

802.1X configuration for wired authentication

Hi all,

i have NPS server 10.211.0.53

HP A5500 switch with IP 10.211.10.18

i want to configure 802.1x to authentication computers that are joined to the domain to connect to network, and computers not connected to domain to be requested for username and password to be able to connect

 

how to configure this??

thanks

4 REPLIES
faisalraza
Occasional Visitor

Re: 802.1X configuration for wired authentication

Hi, its quite simple. I also hit my head on this issue by ready many documents and blogs. Finally I've done it successfully. 

 

Would you please share your scenario and the infrastructure with the configuration. I will send you the configuration file with modification. 

 

Regards

Faisal

Personal Info Removed

Samir_FMC
Occasional Advisor

Re: 802.1X configuration for wired authentication

Hi

 

i have the following

pc ====access switch ==== core-switch ==== NPS server

i have rolledback all prevoius configuration 

i used configuration was on the configuration guides.

 

please let me know if you have solution for this

 

thanks

Linkk
Frequent Advisor

Re: 802.1X configuration for wired authentication

I suppose you have a Windows NPS.
You have to add the RADIUS server to the access switches and configure each port to use EAP RADIUS. The other configuration is on the NPS, you need to add each access switch as a RADIUS client and configure your different policies. 

Do you have procurve or comware access switches?

 

Edit:

Don't forget to activate the "automatic configuration (cabled)" service on your Windows hosts. This service activates 802.1X authentication for Windows and is disabled by default.

hpwizard
Visitor

Re: 802.1X configuration for wired authentication

I also had this issue. Very useful information, Linkk.