HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Comware Based
cancel
Showing results for 
Search instead for 
Did you mean: 

A5120EI-CMW520-R2221.bin will not load "no correct default file to boot"

 
ac1
Occasional Contributor

A5120EI-CMW520-R2221.bin will not load "no correct default file to boot"

How to access to load new software what ports are available to tftp if you can not load OS

2 REPLIES
parnassus
Honored Contributor

Re: A5120EI-CMW520-R2221.bin will not load "no correct default file to boot"

Given that being a little bit more descriptive and detailed (Which exact Switch? which software version was it running before the failed update? what exact update procedure did you followed? did you verified dowloaded bin file hash? and so on...) is always a good thing when exposing an issue to others...have you tried to connect directly to Console port using the proper HP provided cable (as per HPE 5120 EI switch documentation)?

It should be a valid approach to start recovering.
ac1
Occasional Contributor

Re: A5120EI-CMW520-R2221.bin will not load "no correct default file to boot"

My mistake I received bad info the switch is a 4800G  running Bootrom version 710. It just cycle through to boot menu after  message Loading error in CRC checksum, File name a5120ei-cmw520-r2221.bin, no correct default file to boot.