Comware Based
cancel
Showing results for 
Search instead for 
Did you mean: 

A5500 SFPs Standards

FerminTRV
Occasional Contributor

A5500 SFPs Standards

HI!

 

I`m tiring to decide what`s transceiver SFP its the best choice to connect two brand office in different buildings. I have one fiber installation based on:

- About: 200meters

- fiber Multi Mode 62,5/125

- Bandwidth needed: 100Mbps.

 

The old standard for get this scenario its 100BASE-FX but with the A5500 Series it don`t appears to be compatible. In this case with the HP configurator http://h10144.www1.hp.com/configurator/configurator.htm only get:

- 100Base-SX

- 100Base-LX

 

Are there new standards for 100Mbps? Are there compatible with 100Base-FX electronic.

 

I suppose that this new standard can run with fibers in 200 and 62,5/125. 

 

Can anybody confirm this?

 

Thanks

2 REPLIES
krastev
Occasional Visitor

Re: A5500 SFPs Standards

100Base-SX uses two strands of multi-mode

100Base-Lx uses two strands of single-mode

 

I guess you should use SX.

 

reference

scotteberg
Advisor

Re: A5500 SFPs Standards

The short answer is that they are not compatible but completely replace the 100-FX technology.