03-02-2011 04:59 AM
Dear Experts,
below are interface configuration examples for Auto and normal modes for voice vlan, I need your expert help to validate those configurations.
Voice Vlan 160
Data Vlan 99
---------------------------------------------------------------------------------
Auto Voice Vlan
! TAGGED VOICE PACKETS -->
PC in vlan 99 behind the Phone (vlan160)
[Device] interface gigabitethernet 1/0/1
[Device-GigabitEthernet1/0/1] port link-type hybrid
[Device-GigabitEthernet1/0/1] voice vlan mode auto
[Device-GigabitEthernet1/0/1] voice vlan 160 enable
[Device-GigabitEthernet1/0/1] port hybrid vlan 99 untagged
! UNTAGGED VOICE PACKETS
only Phone (vlan160) connected to the port - voice vlan untagged
! TAGGED VOICE PACKETS
only Phone (vlan160) connected to the port - voice vlan tagged
------------------------------------------------------------------------------------------------
Manual Voice Vlan
[Device-GigabitEthernet1/0/1] undo voice vlan mode auto
[Device-GigabitEthernet1/0/1] port hybrid pvid vlan 160
[Device-GigabitEthernet1/0/1] port hybrid vlan 160 untagged
[Device-GigabitEthernet1/0/1] port hybrid vlan 160 tagged
################################################
Many Thanks,
03-18-2011 08:10 AM - edited 03-18-2011 08:11 AM
I currently doing research on setting up a vlan voice, according to my research, I would add a command in your paragraph " VOICE Tagged Packet " :[Device-GigabitEthernet1/0/1] port hybrid pvid 99
to declare your default port VLAN
05-25-2017 06:55 AM
If I don't know the MAC addresses from the IP phones but I know the MAC from the VOIP server, can I use this configuration on its interface?
