ACL Rule Fails When Logging Enabled on HP v1910-24G (Comware 5)

[StudentDev7]

Hi everyone,

I'm running into a problem enabling logging on one of my ACL rules. Specifically this rule:

rule 30 deny ip destination 10.0.0.0 0.0.255.255 logging

I have this ACL applied (packet-filter) to a Vlan-interface inbound.

When the logging parameter is enabled, I get the following error:

ACL_RULE_OTHER_ERROR - Error occurred in ACL 3010 rule 30.

Or, if the ACL has not yet been applied to the Vlan-interface, I get the following error when I apply it with packet-filter:

FLT_SET_POLICY_NOTSUPPORT_FAIL - Failed to apply the filter policy to or refresh the filter policy 3010:30 on interface Vlan-interface10.Not supported.

I know this problem is specific to the logging argument because, when I remove it from the rule, everything functions just fine.

However, for security/administrative purposes (in case I have accidentally blocked a legitimate connection), I really need logging available.

Any idea what's going on and how I can fix this?

Thank you in advance!

[VoIP-Buddy]

What version of code are you running?  The latest code is R1519P06.  This could be a resolved issue if your code is very old.

Dav id

[StudentDev7]

Hi David,

Thank you for the reply. I had considered the same thing. Unfortunately, I am currently running 1519P06.

Any other ideas?