Comware Based
cancel
Showing results for 
Search instead for 
Did you mean: 

Baseline 2924 - SFP Plus

shawngayler
Occasional Contributor

Baseline 2924 - SFP Plus

I have a 3Com Baseline 2924 - SFP Plus switch model # 3CBLSG24



I have a switch that needs fixed IP, and VLans, i can do this but here is my problem.  When/if the device loses power,  i lose everything i have configured.  I have created a backup and then  restore but when i do, nothing has been saved.  



Am i doing something wrong?  Do i need to download new firmware?



To create the backup I select the https, and create, save to my desktop.



Then to test i am resetting the appliance, go to the restore Tab, and upload via http, then it tells me to reboot.  I go to the reset tab, and press the reboot button.



I appreciate any help in advance.



2 REPLIES
illness
Occasional Visitor

Re: Baseline 2924 - SFP Plus

 



 



 



I had this problem with 2924's and the 2948's. The latest firmware fixed the problem for me.



illness



This message was edited by illness on 2-10-10 @ 12:43 PM
marcos
Advisor

Re: Baseline 2924 - SFP Plus

You did click on the "Save Configuration" link on the upper left of the admin page before rebooting, did you?