Comware Based
1748265 Members
3965 Online
108760 Solutions
New Discussion юеВ

Re: Baseline 2924 firmware upgrade

 
ahankiewicz
New Member

Baseline 2924 firmware upgrade

Does know anythink about Firmware upgrade on the above switch.





Yesterday I tried to upgrade the firmware using Hyper Terminal - I check contections to the switch and using command line "Upgrade BRS01_00_07 bootcode"





I started to load the file but each time it timedout with a message that upgrade had failed!





Help!











Andrew



5 REPLIES 5
Fred_Mancen_1
Super Advisor

Re: Baseline 2924 firmware upgrade

You can upgrade Baseline switches firmware through web console. System administration tab.



HTH



Regards,
Fred Mancen
ahankiewicz
New Member

Re: Baseline 2924 firmware upgrade

Thanks



The manual (page165) "Note: The bootcode can only be upgraded using the Command Line Interface (CLI)"



I am now totally confused!



I downloaded BRS01_00_07.bin from 3Com, is the software image the file I downloaded or I am missing the point?



Help me out





Andrew





Fred_Mancen_1
Super Advisor

Re: Baseline 2924 firmware upgrade

The bootcode is the bootrom software; the .bin file is the operational system. You can upgrade the bootcode from console, but the .bin only through web console.



HTH



Regards,
Fred Mancen
ahankiewicz
New Member

Re: Baseline 2924 firmware upgrade

OK



Can you lead me the steps to achieve the Firmware update.



including:



TFTP Server IP Address? 



Source file name - were can I find it



Thanks



Andrew



 



 



 



 



 



Fred_Mancen_1
Super Advisor

Re: Baseline 2924 firmware upgrade

Buddy, the TFTP Server IP address is the IP address of your notebook, where the TFTP Server software needs to be installed. You can download a great and free TFTP software on this URL:



http://rapidshare.com/files/316174622/tftp_desktop_free.exe.html



The filename is the switch software.



HTH



Regards,
Fred Mancen