Comware Based
cancel
Showing results for 
Search instead for 
Did you mean: 

Baseline Switch 2924-SFP Plus unable to configure ACL after setting up QoS

MrJohnDoe
Occasional Contributor

Baseline Switch 2924-SFP Plus unable to configure ACL after setting up QoS

Hi there!

 

My Problem is about the Baseline Switch 2924-SFP Plus Switch.

 

When I configure a QoS rule on a port, it is no more possible to bind a ACL rule onto the same port, that's totally normal.

But, if I delete the QoS rule, it should be possible to bind a ACL to the port. But it isn't.

I need ACLs for my clients, so if I once configured a QoS rule on a port, I can never use this port again for my clients, that brings me to despair. 

 

I hoped that the newest firmware would fix it, so I loaded the newest firmware file onto the switch and the problem is still the same.

 

Is anybody out there who can help me??

 

 

P.S. this thread has been moved from Switches, Hubs, Modems (Legacy ITRC forum) to Comware-Based - Hp Forums Moderator