Comware Based
cancel
Showing results for 
Search instead for 
Did you mean: 

Baseline2948 (R.A.D.I.U.S.)

pawel_1
Occasional Contributor

Baseline2948 (R.A.D.I.U.S.)

Hi!

I want to configure 802.1x auth on some ports of my swithes. I have Windows 2003 Server with IAS services, but switch has no reaction about users authentification. I have some dlink swithes and they work fine, i can see logs on server that clients have been authenticated, then i do the same configuration as on dlinks on 3Com and nothing happens. I tried to change many options on server and on switch but clients assign ip addresses without using auth and in logs - nothing!



Can you help me with it!



P.S. Sorry for english!

1 REPLY
Fred_Mancen_1
Super Advisor

Re: Baseline2948 (R.A.D.I.U.S.)

Hi Pawel.



I already implemented this feature, and the settings that I used were:





I had applied the following settings on a 5500G-EI switch:



Global configuration:



domain default enable

#

dhcp-server 1 ip

#

dot1x

dot1x timer supp-timeout 10

dot1x timer reauth-period 60

dot1x authentication-method eap

#

radius scheme system

radius scheme

server-type standard

primary authentication

accounting optional

key authentication pwd01

user-name-format without-domain

#

domain brayner

scheme radius-scheme

vlan-assignment-mode string

domain system

#



Client port setup:



interface GigabitEthernet1/0/10

stp edged-port enable

dot1x

#



Make a double check on the IAS server, enabling the RADIUS service, and setting up the policies according your needings.



HTH