Comware Based
cancel
Showing results for 
Search instead for 
Did you mean: 

Can't Connect to New switch once I moved it

jakeys1999
Occasional Contributor

Can't Connect to New switch once I moved it

Hi all,  I have numerous Procurve 2910al-48G-POE switches that I setup at my desk before moving into the rack. I could connect to each of the switches and configure each one individually.  Well, since I moved the switches into the rack I can no longer connect to one of the switches via I.P.  The other switches I can web to and configure with no issues.  I have static IP's on all the switches and have verified that the address is not is use.   I can console to the switch and change anything that i need to.

 

 

One thing I noticed is that when i defaulted the switch is did not DHCP a new address.  instead it had a 127.0.0.0. IP. 

1 REPLY
Fred_Mancen_1
Super Advisor

Re: Can't Connect to New switch once I moved it

Maybe the problem could be the management VLAN configured on the switches. If your workstation is running in a different VLAN from the management VLAN of the switches, you could not reach them.

 

HTH