Cannot Acces to 4500G

[referefe]

Hi all,

i cannot access to 3com 4500G switch , when i scan via thedude from mikrotik, services http, ssh, telnet, ping is down,

is it another way to access my switch?

thx all

[Fred_Mancen_1]

If you cannot reach your switch through its IP address, the only way to access it is using the local console. Make a double check if there is some firewall rule that blocks the access or some route missing in the environment.

Regards.

[referefe]

when i try access 4500g with console there is no response from 4500g, usually when i was using console switch will ask user or password to login, and i make sure thats firewall not block port for telnet, ssh, http 

[Fred_Mancen_1]

Did you check the terminal settings? 19200/8N/1/N.

If you cannot access the switch in any way, the only method is to reboot the switch already connected to the console and press CTRL+B during boot up, then enter the menu options in order to check if there is some problem with the switch. Maybe the firmware is corrupted, or something like that.

Regards.