HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Comware Based
Showing results for 
Search instead for 
Did you mean: 

Connecting console to 3300

Occasional Contributor

Connecting console to 3300


I am trying to connect console to single switch

3300 SM.

With hypertrm in XP i set the speed with different baud rate but still nothing is coming on console.

But to the same port I conncted another device it is working ok. That means my PC com port is working ok.

There is no "reset" swicth any where locataed on the switch, so that we load the defaults and at least canb take web access.

Please share the experience.

Thanks in advance.


Trusted Contributor

Re: Connecting console to 3300

Rates 9600 or 19200 are common. On older devices you habe to disable all flowcontrol features

H3CSE, MASE Network Infrastructure [2011], Switzerland