Comware Based
cancel
Showing results for 
Search instead for 
Did you mean: 

E5500 - 03-03-02s168ep21.app - Checksum is different from unit1's

 
Advisor

Re: E5500 - 03-03-02s168ep21.app - Checksum is different from unit1's

Hi everyone I have the same issue in a lot of stacks in my site. I could not track cause and efecct. I have this in my 3com 5500 SI and EI in the built s4m03_03_02s168ep21.app

<SWA>display version
3Com Corporation
Switch 5500-EI Software Version 3Com OS V3.03.02s168ep22
Copyright (c) 2004-2013 3Com Corporation and its licensors, All rights reserved.
Switch 5500-EI uptime is 3 weeks, 6 days, 4 hours, 3 minutes.

Saving configuration. Please wait...
.........
Unit1 save configuration flash:/3comoscfg.cfg successfully
Unit2 flash:/3comoscfg.cfg' checksum is different from unit1.
Unit3 flash:/3comoscfg.cfg' checksum is different from unit1.
Unit4 flash:/3comoscfg.cfg' checksum is different from unit1.
Unit5 flash:/3comoscfg.cfg' checksum is different from unit1.

<SWA>
%Nov 10 09:04:43:637 2017 SWA CFM/3/CFM_LOG:Slot=0;- 1 -Unit1 saved configuration successfully.
%Nov 10 09:04:43:639 2017 SWA CFM/3/CFM_LOG:Slot=0;- 1 -Unit2's checksum is different from unit1's.
%Nov 10 09:04:43:640 2017 SWA CFM/3/CFM_LOG:Slot=0;- 1 -Unit3's checksum is different from unit1's.
%Nov 10 09:04:43:641 2017 SWA CFM/3/CFM_LOG:Slot=0;- 1 -Unit4's checksum is different from unit1's.
%Nov 10 09:04:43:643 2017 SWA CFM/3/CFM_LOG:Slot=0;- 1 -Unit5's checksum is different from unit1's.

Advisor

Re: E5500 - 03-03-02s168ep21.app - Checksum is different from unit1's

I have changed all my local-users password for the type password simple and the issue remains the same.

New Member

Re: E5500 - 03-03-02s168ep21.app - Checksum is different from unit1's

Same issue here with a stack of 3 5500 units.  Tracked it down to the snmp config, as it can save fine if I turn that feature off and delete all lines, but as soon as I add it back I get the checksum error.  I've manually examined the files too, and all are exactly the same so I'm at a loss here.

Firmware on all three was updated prior to forming the stack, and is V3.03.02s168p23.