Comware Based
1748185 Members
3901 Online
108759 Solutions
New Discussion ī„‚

Re: ERPS ring between HPE 5510 and ISW Series switches

 
OuassimSelki
Occasional Contributor

ERPS ring between HPE 5510 and ISW Series switches

Hello,

Can you please guys help me configure an ERPS ring between one HPE 5510 and some ISW Series switches ?

I've already done it between my ISW Series switches, below my configuration :

 

Ring Node 1 (RPL Owner) :

mep os-tlv oui 0xC sub-type 0x1 value 0x2
mep 1 down domain port level 0 interface GigabitEthernet 1/9
mep 1 vid 3001
mep 1 peer-mep-id 14 mac 00-22-3B-11-3B-B6
mep 1 cc 0 fr300s
mep 1 aps 0 raps
mep 2 down domain port level 0 interface 2.5GigabitEthernet 1/2
mep 2 mep-id 2
mep 2 vid 3001
mep 2 peer-mep-id 3 mac 00-22-3B-11-3C-75
mep 2 cc 0 fr300s
mep 2 aps 0 raps
erps 1 major port0 interface GigabitEthernet 1/9 port1 interface 2.5GigabitEthernet 1/2
erps 1 mep port0 sf 1 aps 1 port1 sf 2 aps 2
erps 1 rpl owner port0
erps 1 vlan 1001,111

 

Ring Node 7 (RPL Neighbour) :

mep os-tlv oui 0xC sub-type 0x1 value 0x2
mep 1 down domain port level 0 interface 2.5GigabitEthernet 1/1
mep 1 mep-id 13
mep 1 vid 3001
mep 1 peer-mep-id 12 mac 00-22-3B-11-3C-22
mep 1 cc 0 fr300s
mep 1 aps 0 raps
mep 2 down domain port level 0 interface 2.5GigabitEthernet 1/2
mep 2 mep-id 14
mep 2 vid 3001
mep 2 peer-mep-id 1 mac 00-22-3B-11-3C-BF
mep 2 cc 0 fr300s
mep 2 aps 0 raps
erps 1 major port0 interface 2.5GigabitEthernet 1/1 port1 interface 2.5GigabitEthernet 1/2
erps 1 mep port0 sf 1 aps 1 port1 sf 2 aps 2
erps 1 rpl neighbor port1
erps 1 vlan 1001,111

 

Other Ring nodes 2 to 6 : With some differences like the "Mep-Id" and "Peer Mep-Id" ...

mep os-tlv oui 0xC sub-type 0x1 value 0x2
mep 1 down domain port level 0 interface 2.5GigabitEthernet 1/1
mep 1 mep-id 3
mep 1 vid 3001
mep 1 peer-mep-id 2 mac 00-22-3B-11-3C-BE
mep 1 cc 0 fr300s
mep 1 aps 0 raps
mep 2 down domain port level 0 interface 2.5GigabitEthernet 1/2
mep 2 mep-id 4
mep 2 vid 3001
mep 2 peer-mep-id 5 mac 00-22-3B-11-3B-9D
mep 2 cc 0 fr300s
mep 2 aps 0 raps
erps 1 major port0 interface 2.5GigabitEthernet 1/1 port1 interface 2.5GigabitEthernet 1/2
erps 1 mep port0 sf 1 aps 1 port1 sf 2 aps 2
erps 1 vlan 1001,111

 

Thanks a lot.

Ouassim

2 REPLIES 2
parnassus
Honored Contributor

Re: ERPS ring between HPE 5510 and ISW Series switches

Greetings, I'm not an expert about Ethernet Ring Protection Switching (ERPS) and I totally ignore what exactly ISW Switch Series is (not HPE for sure)...but ERPS on HPE FlexNetwork 5510 Switch Series can be deployed following its High Availability Guide (read about ERPS starting from page 92).


I'm not an HPE Employee
Kudos and Accepted Solution banner
OuassimSelki
Occasional Contributor

Re: ERPS ring between HPE 5510 and ISW Series switches

ISW Switches : Industrial Ethernet Switches

In my case, i use ComNet Switches

I'd tried deploy ERPS following the HPE 5510 High Availability Configuration Guide, but i have many difficulties concerning :

* MD : Maintenance Domain  * MA : Maintenance Associations ... also the fact that MA serves a Vlan !

In the other Switches, it's very simple to create a MEP. Domain is the port, and i have no MA... I use the Web GUI for doing it