Easy question on HP 5920

[calleghf]

Hello,

I'm not a networking guy and need to deploy a 200-HC Vmware cluster solution. One of the requirements is that the the ports switches where I have connected the servers and IP storage devices need to be enabled for IPv6 and multicast in order to be automatically deployed. How can I verify if IPv6 is enabled and multicast too on these ports ?

We have no VLAN configured just the default one.

Thanks a lot

Fausto  

[johnk3r]

What is the switch model?

[calleghf]

Model is HP 5920 

[johnk3r]

OK.
These settings are not configured by default. You have to enable and configure as needed.